Processes of Powder Coatings
One Layer Powder Coating on Car Model
It is easy to use powder coatings. Here is a brief introduction to the spraying process of single-coat powder coatings. Taking red wrinkle powder coating for example, hang the car model workpiece, and spray the powder. After confirming that the appearance of the workpiece is completely even, bake it and cure at high temperature for a period of time. Then, take it out to cool down and finish. The various colors of the outdoor wrinkle powder coatings are all in stock. Please contact KwoLin Co., Ltd. for samples and order.
2-Coated Powder Coating on Car Model
This is a demonstration video of two-coat and two-bake powder coatings. Starting from the first coat of silver powder primer. The powder is adsorbed by electrostatic, and the first coat of car model is finished after baking. Then, spray the candy blue powder coating, and finally it is baked into a finished car model display with two coated and two baked. KwoLin offers a variety of exterior candy clear powder coating colors in stock. Please contact KwoLin Co., Ltd. for samples and order.
Powder Coating Production Process
The production process of powder coating by KwoLin:
(1) Mix and tone with resin, toner, inorganic filler and other materials.
(2) Extruder extrudes slurry.
(3) Tablets press machine pulverize coarse powder into tablets.
(4) Grind the tablets into colorful powder.
(5) Weigh, labeling, and packaging.
The whole process of powder coating production is a physical mixing process with no chemical reaction, no added solvent, and no waste water. It is a very safe and environmentally friendly procedure.
Procedures of Developing& Manufacturing Powder Coating Samples
The development of powder coating samples is mostly a manual procedure. Generally, it requires to go through complex processes such as batching, extrusion, tableting, milling, sieving, spraying, baking, color proofing, physical property confirmation, formula correction and fine-tuning, etc. Finally, the sample powder that meets the requirements is obtained. The procedure loss is huge. The description is extracted here for your reference.
Use our powder coatings on conductive plastic. The process contains spraying, baking and adhesive test. The result shows that Powder Coating on Plastic could be done well. It also can be used in other colors and textures.
